Luminova Graphs &
Diagrams
The Photographs and 3-D diagrams shown below
illustrate the superiority of
LumiNovaŽ over conventional pigments. Both
test surfaces were activated under a standard light source of 1,000 lux
for 5 minutes. The afterglow images were obtained using a CCD camera at 5min.,
60min., and 500 min. intervals after removal of the excitation source. The
photometrically measured afterglow intensities at each time period are illustrated
by the 3-D diagrams, while the photographs show the actual brightness difference
between the two pigments.
It is obvious from the unretouched photographs and 3-D diagrams that LumiNovaŽ
is
10 times superior both in initial brightness and length of afterglow to
conventional phosphorescent pigments. Less LumiNovaŽ
yields better brightness,
thanks to its smaller specific gravity and higher bulk density.
If your application needs a pigment that will glow all through the night, then
you need
LumiNovaŽ !
Order
Literature
Luminova: Detailed Property
Analysis Luminova: Introduction
Luminova:
Photo
Galleries: G1, G2,
& G3